LATEST - If you had difficulty registering recently please try again now we have found and fixed the problem.

Camera mount w/air trigger

Built a scanner? Started to build a scanner? Record your progress here. Doesn't need to be a whole scanner - triggers and other parts are fine. Commercial scanners are fine too.
Post Reply
User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Camera mount w/air trigger

Post by jck57 »

Still messing around with air triggers. Should probably just give it up and go with CHDK. In any case, the loc-line may work with other rigs.
Attachments
IMG_0034s.jpg
IMG_0034s.jpg (66.67 KiB) Viewed 11764 times
IMG_0032s.jpg
IMG_0032s.jpg (83.64 KiB) Viewed 11764 times
IMG_0030s.jpg
IMG_0030s.jpg (77.29 KiB) Viewed 11764 times
IMG_0031s.jpg
IMG_0031s.jpg (68.41 KiB) Viewed 11764 times
Anonymous1

Re: Camera mount w/air trigger

Post by Anonymous1 »

Amazing work! Now, THIS is a DIY remote trigger.
User avatar
rob
Posts: 773
Joined: 03 Jun 2009, 13:50
E-book readers owned: iRex iLiad, Kindle 2
Number of books owned: 4000
Country: United States
Location: Maryland, United States
Contact:

Re: Camera mount w/air trigger

Post by rob »

Ha ha! Do you punch the bag to take a picture? ;)
The Singularity is Near. ~ http://halfbakedmaker.org ~ Follow me as I build the world's first all-mechanical steam-powered computer.
User avatar
daniel_reetz
Posts: 2804
Joined: 03 Jun 2009, 13:56
E-book readers owned: Used to have a PRS-500
Number of books owned: 600
Country: United States
Contact:

Re: Camera mount w/air trigger

Post by daniel_reetz »

That's a really beautiful design, jck57 - the combination of trigger, air line, and camera support is pure genius! I am totally impressed with your idea.

Today I learned that the kind of cable used in bicycle brakes and camera triggers is called a "Bowden cable".
User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Camera mount w/air trigger

Post by jck57 »

rob wrote:Ha ha! Do you punch the bag to take a picture? ;)
Now you're boxing outside the think.
E^3
Posts: 41
Joined: 12 Jul 2010, 21:06

Re: Camera mount w/air trigger

Post by E^3 »

Hi Bro!

That's the coolest project I have witnessed!

Bytheway, how long is the hose?


Thank

E^3
L0g1cM0del
Posts: 17
Joined: 04 Mar 2014, 00:53

Re: Camera mount w/air trigger

Post by L0g1cM0del »

That is a really cool setup. I was thinking when I get another camera to maybe use a solenoid to trigger the press, and that way it wouldn't have to worry about compatibility issues with CHDK and could use any camera.

What are you using to push the air through?

Also, how do you control for the pressure of air? What I mean is how do you know how much air is enough to push the button down far enough without pushing too much and potentially damaging the button. That may not even be an issue, but was curious. Thanks.
User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Camera mount w/air trigger

Post by jck57 »

Thanks for all the nice comments.
L0g1cM0del wrote:That is a really cool setup. I was thinking when I get another camera to maybe use a solenoid to trigger the press, and that way it wouldn't have to worry about compatibility issues with CHDK and could use any camera.

What are you using to push the air through?

Also, how do you control for the pressure of air? What I mean is how do you know how much air is enough to push the button down far enough without pushing too much and potentially damaging the button. That may not even be an issue, but was curious. Thanks.
Thinking about using compressed air and a three-way air switch since I already have a compressor permanently installed and plumbed in my shop.

http://www.mead-usa.com/products/media/ ... itches.pdf

As you pointed out, too much force is bad. I Would need a regulator to reduce the pressure to minimum needed to depress the shutter buttons. Another method is to use a foot powered air pump to either fire the cameras directly or to pump up a little tank and then release the air pressure to the shutter triggers with the air switch.
Post Reply